Features | Specifications | Manuals
Please note: All models are discontinued as of February 2008.
SE32 INVERTER FEATURES
The Selectronic SE32 sine wave inverter comes with many features not normally found in other inverters. An illuminated display on the front panel allows you to tailor your inverter to suit your needs, perform diagnostics, and take vital readings; no compromises needed. As if this is not enough, you also have the ability to upgrade to ENERGY MANAGEMENT Mk II as your needs develop. As you can see, there is now no need to limit the ability of your power system by the inability of your inverter. No Compromise Displays Safety and Standards Simplicity Modular Construction Fully Upgradable Applications
For more detail about Energy Management Mk II, click here. |
SELECTRONIC SE32 INVERTER SPECIFICATIONSELECTRICAL |
|||
PARAMETER |
SE32 Inverter |
CONDITION |
|
Output Power |
2400W |
Max Continuous |
|
Output Power |
2200W |
Max Continuous |
|
Voltage Input Range |
20-34V DC |
Range |
|
Input Current |
0.06A DC |
Stand By |
|
Demand Start Sensitivity |
3-30W |
User Adjustable |
|
Low Voltage Shutdown |
19 - 23V DC |
User Adjustable |
|
High Voltage Shutdown |
30 - 34V DC |
User Adjustable |
|
Output Voltage |
Adjustable from 220 to 240V AC +/- 4% |
@ Nominal DC Input, |
|
Output Current |
10A AC |
Max Continuous |
|
Output Wave Shape |
True Sine Wave |
||
Power Factor Limitations |
Nil |
||
Efficiency |
|
||
Time to Shutdown |
|
||
Input/Output Isolation |
1875 V AC |
||
Memory Retention |
Permanent |
||
Operating Temperature Range |
-10 °C to 50 °C |
||
Conforms to standards |
AS3100 (wiring), AS3108, AS1044 (EMC), C tick |
||
|
|||
Size |
500mm wide x 180mm high x 370mm deep |
||
Weight |
22kg |
||
Weight Packed |
25kg |
||
Input Lead Length |
1.5 metres |
||
Output Wiring Method |
Rear three terminal junction box with conduit knockouts |
||
Output Socket |
Dual switched GPO |
||
Chassis |
Powder coated zinc steel (Wedgwood Blue) |
||
DC Isolation |
Single Pole Circuit Breaker |
||
Warranty |
5 year parts and labour (Conditions apply) |
Through a policy of continued development, specifications or sizes quoted are subject to change without notice. Note: All power ratings are at 1.0 Power Factor, and apply at 25°C unless otherwise stated. WARNING - All Remote Power System installations must comply with the relevant requirements of your state or national standards. It is imperative that only Registered Electrical Contractors are permitted to install or check any appliance or wiring in your installation. Manuals
Brochures
|