Selectronic Australia

Selectronic
Silver Series 1200 & 1500 Inverters

Selectronic SPI 1500 Silver Series Inverter

Features | Specifications

Please note:
This inverter is discontinued as of January 1, 1999.
This page is for information only.
Designed and manufactured by Selectronic, the Silver Series inverters have been introduced to meet the demand for a realistically rated, competitively priced inverter from a 12V or 24V battery. The series offers performance, reliability and features not found in other brands within the same price range.

FEATURES

Continuously Rated
Unit rating is for 24 hours operation. All ratings are at a practical 25 deg.C ambient.

Higher Intermittent Ratings
Enough intermittent power to start most domestic appliances.

Improved Performance with Inductive Loads
Starts and runs fluorescent and high efficiency lighting and electric motors.

Demand Start
Sophisticated Auto Start. Inverter automatically switches on and off with appliance.

Failsafe Reverse Polarity Protection System
Safeguards against costly repair bills and unnecessary downtime.

Reliability
Protection through sophisticated current and thermal overloads, short circuit and high/low battery volts protection.

Tough Powder Coated Zinc Steel Housing
Impervious to harsh environments.

Portable or Fixed Installations
Strong carry handle and battery clips as standard.

Environmentally Friendly

Two Year Warranty
Protects your investment.

SILVER SERIES 1200 & 1500 SPECIFICATIONS

ELECTRICAL

PARAMETER

SPI 1200-12SS

SPI 1500-24SS

CONDITIONS
Input Voltage
@ 25 deg C Ambient		 12V
10 - 15.5V		 24V
20 - 31V		 Nominal
Operating Range
Input Current
@25 deg C Ambient		 60mA
120A
170A
450A		 60mA
75A
115A
260A		 Stand By
Max. Continuous
1/2 Hour Rating
Max. Surge
Output Power
@ 25 deg C Ambient		 4W/8W*
1200W
1700W
4600W		 4W/8W*
1500W
2300W
5600W		 Min to Start
Max. Continuous
1/2 Hour Rating
Max. Surge
Output Voltage 240V +/- 4% 240V +/- 4%
Output Frequency 50Hz +/- .02% all models
Output Wave Shape Modified square, all models


MECHANICAL
Size 320mm W x 205mm H x 305mm D,
all models
Weight 19kg 21kg
Weight Packed 22kg 24kg
Input Lead Length 1.5 metres
Outlet Socket Dual switched 3 pin GPO, all models
Carry Handle All models
Rubber Mounting Feet All models
* Selectable

Through a policy of continued development, specifications or sizes quoted are subject to change without notice. Note: All power ratings are at 1.0 Power Factor.

WARNING - All Remote Power System installations must comply with the relevant requirements of your state or national standards. It is imperative that only Registered Electrical Contractors are permitted to install or check any appliance or wiring in your installation.