Selectronic Australia

Selectronic
Silver Series 200 Inverter

Selectronic SPI 200 Silver Series Inverter

Features | Specifications

Please note:
This inverter is discontinued as of January 1, 1999.
This page is for information only.

FEATURES

Designed and manufactured by Selectronic, the Silver Series inverters have been introduced to meet the demand for a realistically rated, competitively priced inverter from a 12V or 24V battery. The series offers performance, reliability and features not found in other brands within the same price range.

SILVER SERIES 200 SPECIFICATIONS

Parameter

Condition

SPI 200-12SS

SPI 200-24SS

Input Voltage Nominal
Operating Range
12V
10 - 16V
24V
20 - 32V
Stand By Current Nominal 20mA 20mA
Output Power Min to Start
Max Continuous
1/2 Hour Rating
Max Intermittent
2W
230W
290W
800W
2W
260W
350W
800W
AC Connection Front 3 Pin Outlet
Output Waveform Modified Square
50Hz +/- 0.02% (Xtal locked) All models
Size (mm) 185W x 140H x 225L
Weight 4.2kg (5.0kg packed)
Input Lead Length 1.5 metres

Through a policy of continued development, specifications or sizes quoted are subject to change without notice. Note: All power ratings are at 1.0 Power Factor.

WARNING - All Remote Power System installations must comply with the relevant requirements of your state or national standards. It is imperative that only Registered Electrical Contractors are permitted to install or check any appliance or wiring in your installation.