Selectronic Australia

Selectronic
Silver Series 600 Inverter

Selectronic SPI 600 Silver Series Inverter

Features | Specifications

Please note:
This inverter is discontinued.
This page is for information only.

FEATURES

Designed and manufactured by Selectronic, the Silver Series inverters have been introduced to meet the demand for a realistically rated, competitively priced inverter from a 12V or 24V battery. The series offers performance, reliability and features not found in other brands within the same price range.

SILVER SERIES 600 SPECIFICATIONS

Parameter

Condition

SPI 600-12SS

SPI 600-24SS
Input Voltage Nominal
Operating Range		 12V
10 - 16V		 24V
20 - 32V
Stand By Current Nominal 30mA 30mA
Output Power Min to Start
Max Continuous
1/2 Hour Rating
Max Intermittent		 2W/4W*
620W
880W
2300W		 2W/4W*
660W
1150W
3000W
AC Connection 3 Pin GPO / Rear Junction Box
Output Waveform Modified Square
50Hz +/- 0.02% (Xtal locked) All models
Size (mm) 235W x 180H x 285L
Weight 8.5kg (9.7kg packed)
Input Lead Length 2.0 metres

*Selectable

Through a policy of continued development, specifications or sizes quoted are subject to change without notice. Note: All power ratings are at 1.0 Power Factor.

WARNING - All Remote Power System installations must comply with the relevant requirements of your state or national standards. It is imperative that only Registered Electrical Contractors are permitted to install or check any appliance or wiring in your installation.