Selectronic Australia

Remote Link Software

System Requirements | Support and Download | FAQ

Remote Link is a software add-on to

This software will enable you to connect to any capable inverter from your computer, via a direct serial cable connection or a dial-up modem, and operate the inverter with a virtual keypad.

SA series inverters

The layout is designed to match the physical keypad.

Remote Link also gives you the ability to download up to seven separate usage information files from a SA series inverter, to graph in Microsoft Excel or a similar package.

  • Shunt 1
  • Shunt 2
  • Shunt 3
  • Input 1
  • Input 2
  • Generator Run Time
  • Percentage Battery Charge

The files' output is regular .CSV format, ready for graphing in Microsoft Excel or your favorite viewer.

 

Selectronic PS1 and Power Solutions Australia inverters

For a PS1 or PSA inverter, Remote Link will download the data from either one selected day or the entire stored data contents.

Additionally, you can send Generator Start/Stop and Battery Equalise commands.

 

After downloading data, it is automatically converted for you according to the particular model detected, and graphs spreadsheets are created for viewing in Excel.

 

For Selectronic PS1 inverters only:

In the Selectronic PS1 models, a new LCD Mode even lets you remotely control the inverter using the same buttons available on the inverter's front panel.

 

New to Version 3.0, Remote Link 2008

Version 3.0 can now display and edit settings on a PS1, saving you from having to navigate the menu structure via the front panel. All settings are easily visible / adjustable at a glance.

The system is passcode protected against user editing, and installers' configuration sets can be loaded and saved to / from file by users.

Live readings can display a variety of settings simultaneously on one screen.

 

Licensing

Remote Link is available in varying levels of licensing, depending on the number of sites you need to connect. Please contact the sales department for more details.

*** NEW *** Starting from version 2.1, the program has no restriction on the number of inverter sites each licensed user may connect to.

 

Download Remote Link 2008

 

System Requirements

Functional Minimum

  • SA Series inverter (Or SE Series upgraded with Energy Management Mk II)
  • Any PS1 and most Power Solutions Australia inverters.
    Note that not all PSA inverters are guaranteed to function with Remote Link.
  • Microsoft Windows 98SE / 2000 / XP / Vista / 7.
    NOTE: 64 bit operating systems should operate fine but are not offically supported.
  • Internet Explorer 5.01 or higher.
  • Microsoft .NET 2.0 Framework is required, which is now included in 3.0 and 3.5. To enable this on Windows 8 and higher:
    • From the Add/Remove Programs control panel or equivalent settings,
    • Select "Turn Windows features on or off".
    • Enable ".NET Framework 3.5 (Includes .NET 2.0 and 3.0)"
  • 500 MHz or faster processor.
  • 256 MB RAM
  • Serial COM Port. Many USB-Serial adaptors work fine.
  • Either an external serial modem or a "null modem" (crossover) serial cable.

In addition to the above, the following is recommended for best performance:

  • Pentium 3, 1000 MHz or greater
  • 800 x 600 or greater display area
  • We recommend and support only the NetComm Roadster (AM5698) modem,
    and can supply one if required. However, most other modems will work just fine.