Selectronic Australia

SP PRO: The multi-mode inverter that does it all

Inverter Firmware for SP PRO AU and SP PRO GO

Should you be advised to update the firmware in your SP PRO inverter, you will need the latest SP LINK software.
SP LINK contains the latest firmware that was available at the time SP LINK was released, so you do not need to download it separately.

Image of Firmware Update screenshot in SP LINKCurrent version:

The current version is 9.70.

Firmware 9.00 or higher is an Mandatory update for any new installations after 9 October 2016.

For details of the latest version, see the change history.


BEFORE UPDATING FROM A VERSION LESS THAN 7.00, PLEASE READ THE FOLLOWING DOCUMENT:

TB0004_02 SP PRO Solar Hybrid Control Firmware Upgrade (PDF 398 kB)

To update the firmware:

For more detailed instruction, see
TN0034_09 SP PRO Firmware Update Procedure.