PS1 Inverter Range

Just look at these impressive features!

• 4 line back lit LCD, much easier to read
• Completely new menu structure makes programming much faster.
• Significantly improved electronics for greater reliability
• A “State of Charge” reading replaces “discharge Ah”, for simpler understanding
• More aggressive software makes generator synchronising much faster and reliable
• Selectable Generator type or custom settings improves generator stability
• Auto control of generator further enhanced with “time of day” control
• Auto control of generator will provide emergency power if inverter is out of service
• No power disturbances during starting and stopping of generator
• Can communicate over a serial port or modem using Selectronic Remote Link.
• View up to 32 daily events directly on the LCD without modem or PC.
• Enhanced user adjustability
• Individual display of internal and external shunt current & display of Nett battery current
• Sums generator and inverter outputs together if required for peak load
• Vastly improved LED layout allows quick glance status check
• Programmable Load Search & reduced low load losses
• Greatly improved documentation
• Much simpler installation and easier field PCB replacement
• Physically smaller than previous RAPS units

Manuals

(Revision 8 - 9 firmware) Dispatched on or after 15 August 2006
PC0004_05 PS1 User Manual, Rev 05 (772 kB)
PC0009_05 PS1 Technical Manual, Rev 05 (879 kB)

(Revision 7 firmware) Dispatched 8 May 2006 - 14 August 2006
PC0004_03 PS1 User Manual, Rev 03 (1.09 MB)
PC0009_03 PS1 Technical Manual, Rev 03 (1.14 MB)

(Revision 6 firmware) Dispatched prior to 8 May 2006
PC0004_02 PS1 User Manual, Rev 02 (1.85 MB)
PC0009_02 PS1 Technical Manual, Rev 02 (2.0 MB)

Remote Link Software

Remote Link software can be found here.

Brochures

The product brochure is available in a downloadable form, containing full specifcations.

PS1 Brochure V4 (PDF 784 kb)